General:
ZW30-40.5/2000-31.5 outdoor HV vacuum circuit breaker (hereinafter referred to as ZW30-40.5) can be used
in the power system with rated voltage 40.5KV, rated current 2000A and three - phase AC 50HZ to protect the
equipment in the industrial and mineral enterprises, power plants and substations, which can be used as a
connecting circuit breaker in the workplaces of frequent operation.
This product complies with the standards of the GB1984-89 AC HV Circuit Breaker, IEC56 HV AC Circuit
Breaker and JB3385-1996 3.6-40.5KV Indoor AC HV Vacuum Circuit Breakers.
Features:
A, This product is for outdoor high voltage vacuum circuit breaker, the overall structure of the ceramic column,
a vacuum interrupter in the porcelain, the circuit breaker under the outlet end of the use of the slider-type
contact, the product has a smaller loop resistance and good oriented, the next set of ceramic pillar, to ensure
live parts of the insulation, ceramic kit has absolutely bar, mounted on a common three-phase bottom box on
the upper and lower porcelain comprising a charge 0.02Mpa (20 c) the provisions of gas.
B, the product with 1 to 6 can be independent of the current transformers, transformers can be installed into the
circuit breaker or the outlet end of the line side, or both ends installed. Independent of the current transformer
under its accuracy at any level can meet user requirements, and can be done once or twice without disturbing
each other.
C, with a special trip the circuit breaker signs device that can be read at any time convenient to the vacuum
interrupter trip and overtravel.
D, the circuit breaker oil with excellent cushioning buffer and sub-gate stopper.
E, the circuit breaker is equipped with CT17-IVB-type spring operating mechanism.
| NO |
Name |
Unit |
Data |
| 1 |
Rated voltage |
KV |
40.5 |
| 2 |
Rated insulating level |
Rated 1min power frequency withstand voltage |
Dry test (fracture,phase-to-phase,phase-to-earth) |
95* |
| Wet test (to earth, external insulation) |
80* |
| Lightning impulse withstand voltage (crest) |
185* |
| 3 |
Rated current |
A |
2000 |
| 4 |
Rated short-circuit breaking current |
KA |
31.5 |
| 5 |
Rated short-circuit making current( crest) |
80 |
| 6 |
Rated operative sequence |
0-0.3sCO**-180s-CO** |
| 7 |
Rated out-of-phase breaking current |
KA |
8 |
| 8 |
The rated single condenser group breaking current |
A |
630 |
| 9 |
Rated short-circuit lasting time |
S |
4 |
| 10 |
Rated short-circuit breaking times |
Times |
20 |
| 11 |
Arcing time |
Ms |
<20 |
| 12 |
Fully breaking time |
Ms |
<=85 |
| 13 |
Mechanical endurance( CO) |
Times |
10000 |
| 14 |
Rated charge pressure |
Apply TD-40.5W/2000-31.5( K) Vacuum arc-chute filled with SF6 |
Mpa |
0.02( 20ºC) |
| Apply TD-40.5W/2000-31.5( K) Vacuum arc-chute filled with dry air and pure nitrogen |
| 15 |
Annual leakage rate |
% |
<=1 |
| 16 |
The degree of vacuum
arc-chute |
Arc-chute newly produced |
Pa |
<=1.33X10 -3 |
| Storage period for 20 years |
< 6.6X10 -2 |
Our Services
| 1. |
Pre sale service |
| a. |
make technical solution |
| b. |
send quotation, technical data sheet and drawing |
| c. |
prepare power transmission plan, testing plan,and shipment plan |
| 2. |
In sale service |
| a. |
supervise the manufacturing schedule totally in accordance with the plan |
| b. |
send photos to customer during every manufacturing process(hold point) |
| c. |
inform the customer one week before testinng. |
| 3. |
After sale service |
| a. |
installation and commissioning, training the workers |
| b. |
quick response within 12 hours any time |
| c. |
provide 12 months gurantee period normally. |
FAQ
| 1. Q: |
What is your delivery time ? |
| A: |
Depend on the type of transformer. |
| 2. Q: |
What is your payment term? |
| A: |
30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it. |
| 3. Q: |
What kind of starndard you follow? |
| A: |
IEC, ANSI, CSA, GB, etc |
| 4. Q: |
What kind of supporting documentation you can provide normally |
| A: |
Quotation,outline drawing,manufacturing plan, quality control plan
testing plan, financial report, type test report(KEMA, CESI),reference list,etc |
| 5. Q: |
What is your normal wanrranty period? |
| A: |
12 months after transformer operation. |
| 6. Q: |
Can u do installation and commissioningin user's site? |
| A: |
Yes, we can send our installation team to user's country for service. |
| 7. Q: |
Do you have any experience in this kind of transformer? |
| A: |
Yes, we can provide reference list for check. |
| 8. Q: |
Are you manufacturer or trading company? |
| A: |
Manufacturer with own import & export company. |
Our advantages:
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
Global Service
--Wherever you are, VILLE global network will support and provide you with value.
Quick Response
--In response to your needs without delay, VILLE knows the value of your time.
Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!
Audited Supplier 
){kind=link}
){kind=link}