Three-Phase Oil-Immersed Distribution /Earthing/ Grounding / Power Transformer

• Customization: Available
• Application: Power, Electronic, Instrument, Lighting, Rectifier, Audio, Power Plant, Power, Electronic, Instrument, Lighting, Rectifier, Audio, Power Plant
• Phase: Three, Three
• Model NO.: Oil-immersed transformer
• Core: Amorphous Alloy Transformer, Amorphous Alloy Transformer
• Cooling Method: Oil-immersed Type Transformer, Oil-Immersed Type Transformer
• Winding Type: Customized, Customized
• Certification: ISO9001-2000, ISO9001, ISO9001-2000, ISO9001, ISO9001-2000, ISO9001
• Usage: Single-phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer, Single-Phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer, Single-Phase Transformer, Rectifier Transformer, Combined Transformer, Power Transformer, Distribution Transformer
• Frequency Characteristics: 50Hz 60Hz, 50Hz 60Hz
• Shape of Core: Ring, Ring
• Brand: Ville, Ville
• Rated Voltage: 10kv
• Frequency: 50Hz
• Capacity: 30~2500kVA
• Vender Group: : Yyn0;Dyn11
• Transport Package: Wooden Case
• Specification: IEC, ISO
• Trademark: VILLE
• Origin: China
• HS Code: 85
• Production Capacity: 500000/Year

Product Description

Products overview:
Distribution transformer is one of the important equipments for industrial and mining enterprises and civil construction and distribution system
,it reduces the 10(6)kV or 35kV network voltage to the user's 230/440V bus voltage.This product is suitable for AC 50(60) Hz,three-phase
maximum rated capacity of 2500kVA(single-phase maximum rated capacity of 833kVA,generally don't recommend the use of single-phase
transformer),can be used indoor(outdoor),capacity 315kVA and below can be installed on the pole,the ambient temperature no higher than
40ºC,not less than -25ºC,the maximum daily average temperature of 30ºC,the maximum annual average temperature of 20ºC,relative
humidity no more than 90%(ambient temperature 25ºC).Altitude no more than 1000m.If the conditions don't match with the above,should
make appropriate quota adjustments accordance with the relevant provisions of GB6450-86.

The performance characteristics:
1.oil-immersed transformer low-voltage winding in addition to small capacity copper wire,general use of copper foil around the pumping of
the cylinder structure;high-voltage winding using multi-cylinder structure,the winding ampere-turn balance,small leakage,high mechanical
strenghth,and high anti-short-circuit ability.
2.The core and the winding each adopted the tightening measures,the height of the device,low-voltage lead and other fastening parts with
self-locking lock nut,the use of non-hanging structure,can withstand the transport bumps.
3.Coil and core using vacuum drying,transformer oil use vacuum oil filter and oil filling process,make the moisture inside the transformer to a
minimum.
4.The tank uses a corrugated sheet,which has a breathing function to compensate for oil volume changes casued by changes in temperature
,so the product doesn't have oil conservator,obviously reduced the height of the transformer.
5.Since the corrugated plate replaces the oil convervator,the transformer oil is isolated from the ouside,thus effectively preventing the oxygen
and moisture from entering and resulting in the decrease of the insulation performance.
6.According to the above five points to ensure that the performance of oil-immersed transformers doesn't require oil change in the normal
operation,greatly reduced the maintenance cost of the transformer,while extended the life of the transformer.

Feature:

1.Transformer oil good insulation & thermal conductivity performance,while the transformer oil less cost.
2.Can solve the problem of large capacity heat dissipation and high voltage insulation of the transformer.
 

Execution standard:

1.GB1094.1~2-1996,GB1094.3~5-2003 power transformer
2.Technical parameters and requirements of three-phase oil immersed transformer

Our Services

1.	Pre sale service
a.	make technical solution
b.	send quotation, technical data sheet and drawing
c.	prepare power transmission plan, testing plan,and shipment plan
2.	In sale service
a.	supervise the manufacturing schedule totally in accordance with the plan
b.	send photos to customer during every manufacturing process(hold point)
c.	inform the customer one week before testinng.
3.	After sale service
a.	installation and commissioning, training the workers
b.	quick response within 12 hours any time
c.	provide 12 months gurantee period normally.

FAQ

1. Q:	What is your delivery time ?
A:	Depend on the type of transformer.
2. Q:	What is your payment term?
A:	30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it.
3. Q:	What kind of starndard you follow?
A:	IEC, ANSI, CSA, GB, etc
4. Q:	What kind of supporting documentation you can provide normally
A:	Quotation,outline drawing,manufacturing plan, quality control plan testing plan, financial report, type test report(KEMA, CESI),reference list,etc
5. Q:	What is your normal wanrranty period?
A:	12 months after transformer operation.
6. Q:	Can u do installation and commissioningin user's site?
A:	Yes, we can send our installation team to user's country for service.
7. Q:	Do you have any experience in this kind of transformer?
A:	Yes, we can provide reference list for check.
8. Q:	Are you manufacturer or trading company?
A:	Manufacturer with own import & export company.