| Certification: | ISO9001, CCC |
|---|---|
| Protection: | Shock Resistance |
| Installation: | Vertical |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier I.General description
Parallel capacitor banks are usually used in power system to compensate reactive power and improve power factor. In order to limit the passing current and closing inrush current of capacitor bank caused by higher harmonic current to protect the capacitor banks, series reactor is usually installed on the capacitor bank. ville electric CKS oil type series reactor can work normally and continuously under the voltage peak value of 3 √ 2un terminal and 1.35in rated current, and can also operate continuously under the total current of no more than 35% of the third and fifth harmonic current, and the effective value is 1.2in rated current.
II.Structural features
1.The iron core is made of high-quality silicon steel sheet, wrapped with high-strength glass ribbon, thermally fixed, and fixed with special iron core curing paint, which can effectively reduce the vibration between iron core cakes and reduce the noise.
2.The coil is made of high quality paper wrapped copper wire. In order to ensure the safety and reliability of insulation structure, dot adhesive paper is used to prevent coil winding displacement.
3.The reactor adopts ripple oil tank with fully sealed structure. The thermal expansion and cold contraction of transformer oil are adjusted by the elasticity of ripple plate to ensure internal isolation from air, prolong service life and reduce maintenance.
III.Standard
GB 1094.1-1996 power transformers Part 1 General
GB 1094.2-1996 power transformers Part 2 temperature rise
GB 1094.3-2003 power transformers Part 3: insulation horizontal insulation test and external insulation air gap
GB 1094.5-2003 power transformers Part 5 short circuit withstand capability
JB / t5346-1998 series reactor
GB / t10229-1988 reactor
DL / t462-1992 technical conditions for ordering series reactors for high voltage shunt capacitors
IEC289-1988 reactor
IV. Model meaning
V.Environment
1. The altitude shall not exceed 2000m;
2. The operating environment temperature is - 25 ºC to + 45 ºC, and the relative humidity is not more than 90%;
3. There is no harmful gas and inflammable and explosive materials around;
4.The surrounding environment should be well ventilated.
VI.Technical Parameters
Rated voltage:6kV,10kV,35KV
Frequency:50Hz,60Hz
Insulation grade:A
Insulation level:Li60AC25,Li75AC35,Li200AC85
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}