| Customization: | Available |
|---|---|
| Type: | Micro-Computer Control Automatic Diesel Generator |
| Installation Method: | Fixed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Standby Power (50HZ) | 1485KW/1856KVA | |
| Prime Power (50HZ) | 1350KW/1688KVA | |
| Standard Features: | ||
| 1.Engine (4012-46TAG3A) | ||
| 2.Radiator 50ºC max, fans are driven by belt, with safety guard | ||
| 3.24V Charge alternator | ||
| 4.Alternator: single bearing alternator IP23, insulation class H/H | ||
| 5.Absorber | ||
| 6.Dry type air filter, fuel filter, oil filter | ||
| 7.Main line circuit breaker | ||
| 8.Standard contorl panel | ||
| 9.Two 12V batteries, rack and cable | ||
| 10.Ripple flex exhaust pipe, exhaust siphon, flange, muffer | ||
| ENGINE DATA | ||
| Engine Model | 4012-46TAG3A | |
| Number of Cylinder | 12 | |
| Cylinder arrangement | 60° Vee | |
| Cycle | 4 stroke | |
| Aspiration | turbocharged, air-water charge cooled | |
| Bore x Stroke | 160 x 190 mm | |
| Displacement | 45.842L | |
| Compression Ratio | 13.6:1 | |
| Prime Power/speed | 1440KW / 1500rpm | |
| Standby Power/speed | 1583KW / 1500rpm | |
| Speed governor | Electrical | |
| Cooling System | Forced Water Cooling Cycle | |
| Steady speed droop | ≤1% | |
| Total lubrication system capacity | 177L | |
| Coolant capacity | 210L | |
| Fuel consumption at 100% load | 208 g/Kw.h (at 1500RPM) | |
| Starter motor | DC 24V | |
| Alternator | DC 24V | |
| ALTERNATOR DATA | ||
| Alternator model | PI 734D | |
| Rated output prime power | 1650kVA | |
| Efficiency | 96.20% | |
| Rated speed | 1500 RPM | |
| Rated frequency | 50HZ | |
| Phase | 3 | |
| Rated voltage | 400V | |
| Exciter type | excitated by P.M.G, Brushless | |
| Power factor | 0.8 | |
| Voltage adjust range | ≥5% | |
| Voltage regulation NL-FL | ≤±1% | |
| Insulation grade | H | |
| Protection grade | IP23 | |
| Xd DIR. AXIS SYNCHRONOUS | 2.88 | |
| X'd DIR. AXIS TRANSIENT | 0.18 | |
| X''d DIR. AXIS SUBTRANSIENT | 0.13 | |
| Xq QUAD. AXIS RECTANCE | 1.85 | |
| X''q QUAD. AXIS SUBTRANSIENT | 0.26 | |
| Optional | ||
| Optional Alternator Brand WANTONG | Leroy Somer Mecc alte | |
| Optional Alternator model WT-P7D | LSA 51.2 S55 ECO46-2S/4 | |
| Rated output prime power 1650kVA | 1860kVA 1800kVA | |
| Standard Features: | ||
| ◊Standard Auto Control System ◊MCCB | ||
| ◊Base Fuel Tank ◊Oil Drain Valve ◊One set of fuel filter/Oil filter/Belte | ||
| ◊Starting Batteries(Maintenance-Free & Watering-Free) with connective wires | ◊Exhaust System (including until muffler) | |
| ◊Documents | ||
| Options | ||
| ◊Daily Fuel Tank ◊Permanent Magnet Generator(PMG) ◊Remote Control Panel | ||
| ◊Battery Charger ◊Rainproof Type ◊Automatic Transfer Switch | ||
| ◊Engine Heater ◊Soundproof Type ◊Switch box | ||
| ◊Alternator Heater ◊Trailer Type ◊Spare Parts | ||
| ◊Water Separator | ||
Our Performance:
| 1. | Pre sale service |
| a. | make technical solution |
| b. | send quotation, technical data sheet and drawing |
| c. | prepare power transmission plan, testing plan,and shipment plan |
| 2. | In sale service |
| a. | supervise the manufacturing schedule totally in accordance with the plan |
| b. | send photos to customer during every manufacturing process(hold point) |
| c. | inform the customer one week before testinng. |
| 3. | After sale service |
| a. | installation and commissioning, training the workers |
| b. | quick response within 12 hours any time |
| c. | provide 12 months gurantee period normally. |
| 1. Q: | What is your delivery time ? |
| A: | Depend on the type of transformer. |
| 2. Q: | What is your payment term? |
| A: | 30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it. |
| 3. Q: | What kind of starndard you follow? |
| A: | IEC, ANSI, GB, etc |
| 4. Q: | What kind of supporting documentation you can provide normally |
| A: | Quotation,outline drawing,manufacturing plan, quality control plan testing plan, financial report, type test report(KEMA, CESI),reference list,etc |
| 5. Q: | What is your normal wanrranty period? |
| A: | 12 months after transformer operation. |
| 6. Q: | Can u do installation and commissioningin user's site? |
| A: | Yes, we can send our installation team to user's country for service. |
| 7. Q: | Do you have any experience in this kind of transformer? |
| A: | Yes, we can provide reference list for check. |
| 8. Q: | Are you manufacturer or trading company? |
| A: | Manufacturer and Trading company. |
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
Global Service
--Wherever you are, VILLE global network will support and provide you with value.
Quick Response
--In response to your needs without delay, VILLE knows the value of your time.
Ville Electric Company will keep up with the century, the epoch,
Sincerely look forward to your cooperation and win-win!
Create brilliant!
){kind=link}