Box Type Fix AC Ring Main Unit Switchgear;

• Certification: ISO9001:2000
• Shell Material: Stainless Steel
• Structure: Fixed Board
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XGT2(XGN)-12
• Type: Distribution Metering Box
• Form: All- Packaged Type
• Operation Voltage: Low Voltage
• Size: 1 Uint
• Application Range: Power Plants
• Shell Protection Grade: IP55
• Test: Type Test Report
• Transport Package: Wooden Cases
• Specification: IEC
• Trademark: VILLE
• Origin: Ningbo
• HS Code: 8504
• Production Capacity: 50000
• Package Size: 1.00cm * 1.00cm * 1.00cm
• Package Gross Weight: 1.000kg

Product Description

Product introduction
XGT2(XGN)-12 Box Type Fix Type AC RMU Switchgear (side install type) (following abbreviation switch ) is used
in 10kV three-phase AC 50Hz indoor system as accepting and distributing electric energy, especially suitable in
the occasion of frequently operates. The bus system is one bus. This switch fits the requirement of national
standard GB39063~35kV's AC metal closed switch and IEC298, and possesses tightly the shutting meritability
of "five guards "This switch apparatus has been surmounted old type fixed switchgear's defects such as the
switch volume is huge and the maintenance is not convenience, etc. And has surmounted moving out type
switchgear's defects of complicated handcart organization, once connection the protection operation
organization is unreliable, etc. It is a new small model fix type seitchgearof researching and developing by self.
The main switch that this switchgear adopting is VT2A-12's mould side loading type vacuum circuit breaker
developed and designed by self.
GT7(GN)-12 series designed by self is selected as upper and down disconnecting switch.

The switch process list:
Reliable electrically connection.
Convenient examined and repaired.
Installation of once cable can be accomplished before the cupboard.
Product can be installed by the wall.
Use the isolation switch and ground connection switch operation organization and interlock device of
integrationization design, the operates and interlock is convenient and reliable.
Once component is vertial range.
The breaker room, bus room and cable room have leak pressure channel.
The frame is combined by applying aluminium zinc board,
It is the smallest volume in the fixed switch of double disconnection switch in the internal: Wide X deep X height
= 750 X1100 X2100mm.

1. Mechanism compartment7. Cable compartment

2. Pressure meter and inflation/deflation device8. Cable bushing

3. Disconnector operating mechanism9. Current (voltage) transformer

4. Circuit breaker operating mechanism (permanent magnetic)11. Three-position disconnector

5. Vacuum arc-extinguishing chamber10. Gas insulated insulator

6. Lower control box12. Pressure release device

 

Item		Unit	Parameter
Rated voltage		kV	12&35&40.5
Rated current		A	630  1250  2000  2500
Rated frequency		Hz	50
Rated power frequency withstand voltage (1min)	Phase to phase, Phase to earth	kV	42
	Insulation Distance		48
Rated Lightning impulse withstand voltage	Phase to phase, Phase to earth	kV	75
	Insulation Distance		85
1min power frequency withstand voltage of Auxiliary control circuit		V	2000
Rated short-circuit breaking current (effective value)		kA	25  31.5  40
Rated short time withstand current		kA /s	25/4  31.5/4  40/4
Rated peak withstand current		kA	63  80  100
Rated short-circuit making current		kA	63  80  100
Every phase main return circuit resistance		μΩ	≤250
Rated SF6 gas pressure (20ºC)		Mpa	0.045±0.005
Min SF6 gas pressure (20ºC)		Mpa	0.03
Annual SF6 gas loss rate		%	≤1
Rated voltage of auxiliary control circuit		V	DC110/220,AC220
Degrees of protection			Gas-filled compartment:IP67 Low-voltage compartment:IP4X
Dimensions (Width×Depth×Height)		mm	500 ×1000×1850

Our Services

1.	Pre sale service
a.	make technical solution
b.	send quotation, technical data sheet and drawing
c.	prepare power transmission plan, testing plan and shipment plan
2.	In sale service
a.	supervise the manufacturing schedule totally in accordance with the plan
b.	send photos to customer during every manufacturing process(hold point)
c.	inform the customer one week before testing.
3.	After sale service
a.	installation and commissioning, training the workers
b.	quick response within 12 hours any time
c.	provide 12 months guarantee period normally.

 

Thanks for choosing VILLE as your reliable partner ,pls send single line diagram ,we will made according to your drawing.