Product Description
SVR line automatic voltage regulator is a device that ensures stable output voltage by tracking changes in line voltage and automatically adjusting the ratio of the device body. The input voltage can be automatically adjusted within the range of -20% -+10%. It is particularly suitable for lines with high voltage fluctuations or voltage drops. This type of feeder voltage regulator is installed in series at the middle and rear of 6kV, 10kV, and 35kV lines, and the line voltage can be adjusted within a certain range to ensure the user's power supply voltage and reduce line losses. In addition, the FSVR feeder automatic voltage regulator is also suitable for substations where the main transformer does not have voltage regulation capability. This type of voltage regulator is installed on the outlet side of the substation transformer to ensure the voltage of the busbar on the outlet side. It is widely used in fields such as rural power grid, urban power grid, oil field, coal, chemical industry, substation, etc. across the country.
2. Technical parameters
Special rules can be developed by 630KVA, 800KVA, 1000KVA, 1250KVA, 1600KVA, 2000KVA, 3150KVA, 4000KVA, 5000KVA 6300kVA, 8000KVA, 10000kVA.
2.2 Electric pressure: 0.4KV, 6kV, 10kV, 35kV
2.3 frequency: 50 Hz
2.4 Compression Section: -20%~+20%
2.5 files: 7-9 files
2.6 Contact Group: Ya0
2.7. Table of pressure oil: 25#45 #
2.8 Cold Forms: ONAN
2.9 Degrees: LI60kV/AC25kV(6kV), LI75kV/AC35kV(10kV), LI200kV/AC85kV (35kV)
2.10 FFSVR Road automatic pressurization stabilizers use a comprehensive seam-wave tank with oil oil indicators, pressure release; tank-centred signal sources and sample PT for controllers to provide the same signal and working sources;
3, Main features
(1) The entire device has large capacity, low loss, small size, and is easy to install and maintain;
(2) Tracking voltage changes and automatically adjusting the gear position of the three-phase on-load tap changer, with reliable action and high voltage adjustment accuracy;
(3) Voltage reference, action delay, allowable range, and frequency limit can be adjusted as needed, and parameter settings are flexible and convenient;
(4) Display the number of FSVR on load tap changer gear actions, current gear, with indication of the highest and lowest gears;
(5) Equipped with upper and lower gear limit protection and action time limit function, effectively improving the reliability of the product;
(6) The controller has overvoltage droop and undervoltage protection functions. When the circuit is in an overvoltage or undervoltage state, the controller automatically locks; Ensure safe operation of on-load tap changer
(7) The controller adopts industrial grade control chips, with high reliability and strong anti-interference ability, and can adapt to harsh outdoor environments;
(8) Equipped with RS485 communication interface, the controller parameters can be viewed and modified within 30m from the installation point through wireless communication module.
(9) Cloud based remote control can also be added.
3. Basic parameters of voltage regulating switch:
3.1 Resistance of each contact of the switch: related to the number of stages of the on-load tap changer,<500 μ Ω
3.2 Switching electric operation replacement time: 10 seconds
3.3 Switching transition resistance switching time: 15-24 ms
3.4 Electrical life of switch contacts at rated capacity: > 50000 times
3.5 Switch mechanical life: > 500000 times
3.6 Switching transition mode: single resistor or double resistor
4. Performance parameters of voltage regulator controller:
4.1 Working power supply: AC/DC 110-450V
4.2 Rated frequency: 50Hz
4.3 Maximum power consumption: 25W
4.4 Analog input: 2 voltage channels (0-250V)
4.5 Switching input: 10 empty contact inputs
4.6 Switching output: 2 circuits (AC250V/380V l6A)
4.7 Measurement accuracy: voltage (0.5%)
4.8 Anti interference level: meet the requirements of IEC61000-4:1995 level
Product Paramenters
Number of phases: three phases |
Applicable frequency: 50 / 60Hz |
Capacity: 0.5KVA-1600KVA |
Noise: ≤35dB (within one meter) |
Input voltage: 380V (various voltages can be customized according to needs) |
Temperature rise: ≤60 ºC |
Output voltage: 220V (various voltages can be customized according to needs) |
Insulation resistance: ≥50MΩ |
Output voltage accuracy: ± 1% |
Electric strength: 3000VAC / 1min |
Voltage change rate: ≤1.5% |
Design life: 20 years |
Distortion of output waveform: no distortion (compared with input waveform) |
Connection method: any combination of Y / △ (isolation transformer) |
Working efficiency: (isolated) ≥98% |
Cooling method: dry air cooling |
Insulation grade: F |
Overload capacity: 2 times of rated current for 1 minute |
5. Installation instructions
1. The product installation is the responsibility of the user, and the supplier can send after-sales service personnel to the site for guidance.
After the equipment is in place, a grounding wire should be used for multi-point grounding. The grounding resistance should not exceed 4 ohms, and the buried depth of the grounding body should comply with the grounding requirements of the power regulations.
The installation reference diagram is as follows:
Company Introduction
NingboVille Enterprise Co.,Ltd.is a combination of Transformer R&D center, production, sales and after sales service, possesses
of strong technical strength andexcellent manufacturing equipments, as well as modern Office facilities. It specially produces large scale
power transformer and industrial transformers of high quality and reliability. A large share of its resources are devoted to research and
development of industrial and special transformers and reactors for any special application,such as the iron and steel and
electrometallurgical industries.The company main working is suppling, engineering, designing, manufacturing, executing, and
commissioning for transformer .
Why Choose Us
FIRST-CLASS PROCESSING AND TEST EQUIPMENT
We have more than 500 sets of sophisticated, advance production and test equipments, complete and perfect processing equipments, and
scientific and rational processing technology, which guarantee first-class products, Authorized by the Bureau of Zhejiang Technology
Supervision, Quzhou Fangyuan Inspection Company of Power Transmission and Transformation Equipment, whick is based on our testing
center, undertakes the quality inspection of the industry in our province, this is a solid guarantee for our excellent product quality.
BEAUTIFUL ENVIRONMENT
We are confident that good products come from good personnel, and good environment makes qualified personnel. The company is
committed to creating a garden-like working environment for employees. We have green belts, modern standardized workshops and well-
planned parks where we sow our youth; we work hard, so we are harvesting the future.
With the first-class quality products, reasonable price and excellent after-sale services.product not only best-selling all over the country,but
also in the international market have higher credit, such as Thailand, Vietnam, Myanmar, Indonesia, Malaysia,Philippines, Ethiopia and
Nigeria, Saxonstan, Uzbekistan, Korea, Turkey, Sudan, Iran etc. especially in the steel enterprises, VILLE production of transformers already
have high reputation.
Our Services
1. |
Pre sale service |
a. |
make technical solution |
b. |
send quotation, technical data sheet and drawing |
c. |
prepare power transmission plan, testing plan and shipment plan |
2. |
In sale service |
a. |
supervise the manufacturing schedule totally in accordance with the plan |
b. |
send photos to customer during every manufacturing process(hold point) |
c. |
inform the customer one week before testing. |
3. |
After sale service |
a. |
installation and commissioning, training the workers |
b. |
quick response within 12 hours any time |
c. |
provide 12 months guarantee period normally. |
FAQ
1. Q: |
What is your delivery time ? |
A: |
Depend on the type of transformer. |
2. Q: |
What is your payment term? |
A: |
30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it. |
3. Q: |
What kind of standard you follow? |
A: |
IEC, ANSI, CSA, GB, etc |
4. Q: |
What kind of supporting documentation you can provide normally |
A: |
Quotation, outline drawing, manufacturing plan, quality control plan testing plan, financial report, type test report(KEMA, CESI),reference list, etc |
5. Q: |
What is your normal warranty period? |
A: |
12 months after transformer operation. |
6. Q: |
Can u do installation and commission in user's site? |
A: |
Yes, we can send our installation team to user's country for service. |
7. Q: |
Do you have any experience in this kind of transformer? |
A: |
Yes, we can provide reference list for check. |
Ville Electric Company will keep up with the century, the epoch,Sincerely look forward to your
cooperation and win-win!
Create brilliant!