General:
S11-M. RL, Three Phase Distribution Transformer with three-dimensional wound core is a new type hi-tech
and high energy-saving product. Compared with series S9, 80% of no-load current and 30-40% of no-load
loss can be decreased, 8-13dB in noise level can be reduced. It is applicable for distribution, power supply
and lighting in industrial, agricultural, mineral,petrochemical fields.
Application:
S11-.RL Three phase Stereoscopic Scroll iron Core Distribution Transformer is the product of new type high
technology and high save energy. Compared with S9, S11-M.RL's no-load current hangs down 70-80% and no-
load loss reduction 30-40% and noise reduces 8-10dB. It is extensively suitable in factory, mines, petroleum
chemical industry and the distribution of industry and agriculture, motive force and illumination, and especially is
suitable in the power supply place of higher requirement.
Product Features:
The iron core is three phase stereos scroll iron core structure which combined by three single-frame scroll iron
core. The direction of silicon steel block rolling is the same as the magnetic route direction, three single-frame iron core are opposite independence, three-phase magnetic route are the same distance and does not
have the magnetic field distortion in plane scroll iron core triangle area. Iron core pillar and yoke section is close
to round and the HV and LV circle directly winds on the iron core, and the fuel tank is the bucket type fuel tank
of approximate triangle. It possess the merits of strong resisting short circuit ability, small no-load current ,low
noise, small volume, light weight and low temperature rising. The technology quota is advanced, structure is
unique and the appearance is exquisite .
Normal service condition:
Elevation height: less than 1000m
Environmental temperature:
Max. Temperature +40 oC
Max. Daily average temperature: +30 oC
Max. Annual average temperature +20 oC
Min. Temperature -30 oC
Operation environment outdoor:
Symmetry of multi-phase power source
Three-phase power sources shall be almost symmetrical.
Feature:
1.Three-dimensional wound core consists of three core limbs whose cross-section is close to circle. Magnetic
circuit in three phase is totally symmetrical and identical, which shortens the yokes but makes factor of core
limb bigger.
2.After annealing, internal stress can be removed thoroughly for three-dimensional wound core. There is no
higher magnetic reluctance everywhere in its circuit, so no-load loss and energizing current can be decreased
greatly. The test shows that more than 80% of no-load current and 30-40% of no-load loss can be decreased.
3.Only fewer joint caused by continuous wound core, there should no noise occurred due to the blocking inside
the magnetic circuit of stacking core. In such way, 8-13dB in noise level can be reduced, which is almost in the
state of noise silence.
4. Triangle tank is used for such transformer so it is smaller than the normal one. In a word, it is impact, small
size with artistic appearance
Technical Data:
| Product Type |
Rated Capcity (kVA) |
No-Load Loss (W) |
Load Loss (W) |
I0(%) |
UK(%) |
|
| S11-M.RL |
30 |
90 |
600 |
0.60 |
4.0 |
| S11-M.RL |
50 |
120 |
870 |
0.60 |
| S11-M.RL |
63 |
140 |
1040 |
0.57 |
| S11-M.RL |
80 |
175 |
1250 |
0.54 |
| S11-M.RL |
100 |
200 |
1500 |
0.48 |
| S11-M.RL |
125 |
235 |
1800 |
0.45 |
| S11-M.RL |
160 |
280 |
2200 |
0.42 |
| S11-M.RL |
200 |
335 |
2600 |
0.39 |
| S11-M.RL |
250 |
390 |
3050 |
0.36 |
| S11-M.RL |
315 |
465 |
3650 |
0.33 |
| S11-M.RL |
400 |
560 |
4300 |
0.30 |
| S11-M.RL |
500 |
670 |
5150 |
0.30 |
| S11-M.RL |
630 |
840 |
6200 |
0.27 |
| S11-M.RL |
800 |
1000 |
7500 |
0.24 |
| S11-M.RL |
1000 |
1200 |
10300 |
0.24 |
4.5 |
| S11-M.RL |
1250 |
1400 |
12000 |
0.24 |
| S11-M.RL |
1600 |
1700 |
14500 |
0.22 |
Our Services
| 1. |
Pre sale service |
| a. |
make technical solution |
| b. |
send quotation, technical data sheet and drawing |
| c. |
prepare power transmission plan, testing plan,and shipment plan |
| 2. |
In sale service |
| a. |
supervise the manufacturing schedule totally in accordance with the plan |
| b. |
send photos to customer during every manufacturing process(hold point) |
| c. |
inform the customer one week before testinng. |
| 3. |
After sale service |
| a. |
installation and commissioning, training the workers |
| b. |
quick response within 12 hours any time |
| c. |
provide 12 months gurantee period normally. |
FAQ
| 1. Q: |
What is your delivery time ? |
| A: |
Depend on the type of transformer. |
| 2. Q: |
What is your payment term? |
| A: |
30% advance by T/T , 70% before delivery by T/T or L/C or we can discuss about it. |
| 3. Q: |
What kind of starndard you follow? |
| A: |
IEC, ANSI, CSA, GB, etc |
| 4. Q: |
What kind of supporting documentation you can provide normally |
| A: |
Quotation,outline drawing,manufacturing plan, quality control plan
testing plan, financial report, type test report(KEMA, CESI),reference list,etc |
| 5. Q: |
What is your normal wanrranty period? |
| A: |
12 months after transformer operation. |
| 6. Q: |
Can u do installation and commissioningin user's site? |
| A: |
Yes, we can send our installation team to user's country for service. |
| 7. Q: |
Do you have any experience in this kind of transformer? |
| A: |
Yes, we can provide reference list for check. |
Our advantages:
Quality Assurance
--From the very beginning, VILLE ensures quality in every step to achieve the best quality.
Experience Sharing
--With more than 30 years' experience in power industry, VILLE brings you an optimized solution.
Global Service
--Wherever you are, VILLE global network will support and provide you with value.
Quick Response
--In response to your needs without delay, VILLE knows the value of your time.
Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!
Audited Supplier 
){kind=link}